9″ LIFT KIT – GM SILVERADO / SIERRA 1500 – 2014-2018 W/ ALUM OR STAMPED STEEL SUSPENSION WITH FALCON 1.1 MONOTUBE SHOCKS
Fits 2014-2018 GM 1500 trucks with OE Aluminum or Stamped Steel front suspension Allows for up to a 37″ tall off road tire Requires at least a 9 inch wide wheel with -12 offset Retains factory turning radius, ride and handling Works with Front MagneRide Includes premium Falcon 1.1 Monotube shocks Includes new tubular steel upper control arms with TCT pivot bushings. Before purchasing – What Control Arms Does Your Truck Have?Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
About
AutoWheelZone is excited to now offer a brand new 9-inch big lift kit for 2014-2018 Chevy Silverado and GMC Sierra 1500 trucks. This new lift system will work with trucks equipped with or without front MagneRide. The new 44-34900 9 inch lift kit is designed for use on 2014-2018 GM 1500 trucks equipped with the factory Aluminum or Stamped Steel front suspension and includes new tubular upper control arms. Some of the great features our new 9 inch lift kit includes retaining the factory turning radius while minimizing track width increase to less than 0.5″ per side. This kit will allow for up to a 37″ tall tire on a 9 inch wide wheel with -12 offset. Our new “clam-shell” style lower strut extension retains use of the factory struts (both standard and front-only MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride. The addition of our proprietary new tubular upper control arms with TCT pivot bushings.ensures prolonged upper control arm strength which is far superior to the OE stamped steel control arms. Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16″ plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4-inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. (Not for use on AWD applications – 2WD or 4WD only). Rear lift is achieved with are rear add-a-leaf spring and fabricated 3/16-inch thick plate steel rear lift blocks that include built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system includes premium extended length Falcon 1.1 Monotube rear shocks. Notes: Fits up to a 37 tall off road tire – requires a 9 inch wide wheel with -12 offset for no rub (tire tread varies – some aggressive tires may require minor trimming. Not for use on AWD applications. Not recommended for GMC Denali 1500 with REAR MagneRide or other models with Rear MagneRide. Only Front MagneRide compatible. Can be used on trucks with factory Aluminum front suspension. Includes AutoWheelZone ReadyGuard Powertrain Warranty.
Related products
-
AutoWheelZone, a leader in the lifted suspension market, is proud to announce the release of our 8.5″ Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level. 2020-2022 gives 8.5″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks2017-2019 gives 8″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube ShocksNOTE: Tremor versions will not gain the full 7″ over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
Maintains the factory ride and handling.Kits deliver clearance for increased aftermarket tire sizes Exclusive new 8″ lift kit designed for GM 1500 trucks with Adaptive Ride Control.Heavy-duty, laser cut tabbed and slotted steel construction. 8” kits fit tire size up to 37×12.50′ on 20” x 9″ wide wheels with 0 offset with no trimming.Includes unique brackets for proper relocation and angle of the front differential.3/16-inch-thick steel plate cross members and skid plate.Cast iron knuckles have been engineered to provide ideal geometry for a great ride and handling. Includes ReadyGuard Powertrain Warranty.Note: Not compatible with rear mono-leaf springs. Click here to learn how to determine if you have rear mono-leaf springs. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
6” (6” + 2”) kit yields 8” of total lift with factory 2” lift and AutoWheelZone’s 6” liftDelivers clearance for increased aftermarket tire sizes – up to 37×12.50 on 6-inch kit on 9″ wide wheels with 0 offsets with no trimming -18 offset will require minor trimming.The proprietary lower strut clamshell design maintains factory geometry and retains the use of the factory strut.Tube steel upper control arms with maintenance-free pivot bushings and 1-ton ball joints. (6” kit only)3/16-inch-thick steel plate cross members and skid plate.Anti-torsion boxed and gusseted plate steel differential drop brackets.Includes ReadyGuard Powertrain Warranty.NOTES: Use of Auto 4 Hi feature not recommended. Not compatible with rear mono-leaf springs.
-
– Allows for 5.75″ backspace (18-20mm Offset) on 20×9 with 35″ tires- Max tire with trimming 5.5″ backspace (10-13mm Offset) on 20×9 with 37″ tires- Includes two Falcon 1.1 monotube rear shocks- Retains factory turning radius- Allows for use of stock 20” wheels- Work with the auto adjust headlights NOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option or trucks equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Kits only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels at 20″ or larger are compatible (confirm fitment prior to installation). For Tundra with Rear Coil Spring use part number 44-52620.