8.5″ LIFT KIT W/ FALCON SHOCKS – FORD SUPER DUTY DIESEL F250/F350 4WD 2017-2022
AutoWheelZone, a leader in the lifted suspension market, is proud to announce the release of our 8.5″ Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level. 2020-2022 gives 8.5″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks2017-2019 gives 8″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube ShocksNOTE: Tremor versions will not gain the full 7″ over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
Related products
-
8″ Big Lift KitMade to fit 2020-2023 GM 2500HD/3500HD 4WD and AT4 Models.Complete front/rear off-road suspension system.Includes (4) Falcon 1.1 Monotube Shocks.Allow for up to 38″ tall tires.Uses AutoWheelZone’s Forged Torsion Keys.Made In U.S.A.See Details for Notes on Tow Package Compatibility.Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
All-new 2019-2024 Ram 3500 4WD HD 6″ lift kit 6″ front with 5″ rear blocks lift kitIncludes all-new transfer case clocking ring and new heavy-duty transmission crossmember.Includes 4 Falcon 1.1 Monotube shocks tuned specifically for the Ram 3500 HD.For use on Diesel engine Ram 3500 4WD HD trucks only.Allows for up to 37×13.50 tires on 20″ x 9″ wide wheels with -18 offset.Note: Does not work with Factory Air suspension, Auto Level system (factory helper bags) HEMI Gasoline engine, dually models, Classic models, and any automatic-leveling rear air suspension models. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.
-
– Allows for 5.75″ backspace (18-20mm Offset) on 20×9 with 35″ tires- Max tire with trimming 5.5″ backspace (10-13mm Offset) on 20×9 with 37″ tires- Includes two Falcon 1.1 monotube rear shocks- Retains factory turning radius- Allows for use of stock 20” wheels- Work with the auto adjust headlights NOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option or trucks equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Kits only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels at 20″ or larger are compatible (confirm fitment prior to installation).
-
2019-2024 1500 4WD 6″ Lift Kit Maintains the factory ride and handling. Delivers clearance for increased aftermarket tire sizes – up to 35” on 6-inch kit on 9″ wide wheels with 0 offset with no trimming. Top mount strut extensions maintain factory geometry and retain use of the factory strut. 3/16-inch thick steel plate cross members and skid plate. Anti-torsion boxed and gusseted plate steel differential drop brackets. Fabricated steel 5″ rear lift blocks include integrated bump stop landings, offset pin and provides proper pinion angle. Includes premium Falcon 1.1 Monotube Shocks extended length rear shocks. Includes ReadyGuard Powertrain Warranty. Note: Use of Auto 4 Hi feature not recommended. Note: Not for use on Trail Boss, AT4, AT4X, ZR2, Diesel or Denali models. Note: Not compatible with Adaptive Ride Control or Multimatic suspension. Not compatible with rear mono-leaf springs. Click here to learn how to determine if you have rear mono-leaf springs. Not compatible with Super Cruise. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.