3” SST LIFT KIT WITH FABRICATED CONTROL ARMS AND FALCON 1.1 MONOTUBE SHOCKS- GM SILVERADO / SIERRA 2500HD/3500HD 2020-2024
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
Related products
-
2.0″ SST Lift Kit – 2015-19 Subaru Outback Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset 2″ front lift / 1.5″ rear lift Increases ground clearance. Upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mount system.
-
Ford’s new Tremor trucks take Super Duty to another level (69-23251) with Radius Arms making Super Duty Tremor more formidable. This innovative kit allows drivers to clear 37″ tall tires for an even more potent ride.Features & Benefits:• 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models• Allows for 37×12.50 on a 9” wide wheel with +18 offset.• Front spacers and rear blocks• 69-23251 includes tubular radius arms
-
Includes DOM tube steel front upper control arms. Terrain Control Technology (TCT) maintenance-free pivot bushings. Includes HD ball joint for better durability. Heavy-duty fabricated steel rear coil spring spacers. Allows 35X12.50 tire on a 20×9 wheel with 0 offset. Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners. Improved dynamic roll control and low-speed damping. Dramatic improvement in on-road comfort and off-road performance. Optimized fitment for unobstructed suspension travel and articulation. 6061-T6 aluminum alloy shock body resists Impact to protect internal components. Smooth-honed internal shock body surface for long-term performance. 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling. Large shaft diameter provides a wide range of adjustments on adjustable shocks. Hard anodized 6061-T6 aluminum alloy billet piston. NOTE: Vehicles that are pre-lifted/leveled or that have the “off-road package” may net a smaller overall lift height ( ie 2.5” lift vs 3.5” on a non-factory lifted vehicle). Check factory height prior to installing. ** Not for use on trucks that are equipped with factory air suspension. Will not fit Ram TRX models.
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.