2.5″F / 1.5″R SST LIFT KIT – TOYOTA SEQUOIA 2001-2007
2001-07 TOYOTA SEQUOIA 2WD/4WD SST LIFT KIT Max Lift 2.5″F/1.5″R – Max Tire Diameter 33″ INCLUDES DIFFERENTIAL DROP SPACER KITNOTE: Rear spacer is only compatible with one of three Toyota Sequoia rear suspension designs. This spacer is intended to bolt to the frame.
Related products
-
2″ SST Lift Kit for the 2019-2024 Subaru Ascent AWD Offset spacer design for correct caster/camberIncreases ground clearance and improves overall vehicle stance (reduced front/rear rake)Allows for 255/55-R18 tire on a 18×8 wheel with +32 offsetSway bar end-links Easy bolt-on installationNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
2023-2024 Ford Super Duty Radius Arm Drop Bracket Kit
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.