2.0″ SST LIFT KIT – SUBARU CROSSTREK 2018-2024
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
Related products
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
Ford Super Duty Tremor goes even bigger with our 2.5” SST Lift Kits. Ford’s new Tremor trucks take Super Duty to another level – adding the AutoWheelZone 2.5″ SST Lift Kit.Features & Benefits:• 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models• Allows for 37×12.50 on a 9” wide wheel with +18 offset.• Front spacers and rear blocks
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.